The solution for your 3D PMI challenge

Next event: October 13th, 2020  

Mikrocentrum, De Run 1115, Veldhoven

09.30 - 17.30

The first edition of the MBD Solutions Event has taken place. We look back at a very succedul day. There is still a lot of work to be done.  So we have already put the next event on the agenda: 13 October 2020.

Where do we stand by then? What's the next step?

This year the focus was replacing the 2D drawing by 3D PMI (Product Manufacturing Information in 3D).
Various brainstorm sessions with ASML suppliers have revealed the challenges for downstream re-use of 3D PMI. They defined the requirements to benefit from the Model Based Definition.

3dtek2

Why was this MBD Solutions Event being organized?

The goal of this MBD Solutions Event was to showcase the mature solutions / product offerings to ASML suppliers, their sub-contractors and other interested manufacturers, addressing these gathered requirements. There was a ‘Solutions Square’ where the Solution Providers had a booth and could inform visitors about their 3D PMI solutions during the whole day. Almost all solution providers gave presentations or demonstrations of specific solutions they are offering. In total about 20 presentations were given, spread over 4 rooms every hour (5x) during the day. See the program tab for more detailed information.

What is the ASML 3D PMI project about?

Model Based Definition is part of ASML’s digital enterprise. The ASML 3D PMI project is responsible for implementing the creation and use of ASML 3D PMI TPD (Technical Product Documentation).
The ASML 3D PMI project went live in July 2018. This means that suppliers of ASML  are working with the 3D PMI TPDs’ since then.  The first step is to get used to the 3D information instead of receiving the 2D drawing. The next step is to benefit from the digital way of working. The 3D PMI project supports the supply chain to make these steps. The MBD Solutions Event is a result of a good cooperation between ASML and it’s supply chain. Be part of it and benefit from the digital enterprise.

Visit the Solution Square
On the Solutions square you can visit 20 companies that showcase their MBD Solutions. You can visit them all day long.

Presentations
Presentations of the MBD Solutions will be done during the whole day. According the following schedule:

Room 1
09:00-09:30
Registration visitors
09:00-09:30
Registration visitors
09:30-10:00
Opening

Sikko Wittermans, MD DE Mechanical Development, ASML
Godfried Kaanen, Chairman, Koninklijke Metaalunie
09:30-10:00
Opening

Sikko Wittermans, MD DE Mechanical Development, ASML
Godfried Kaanen, Chairman, Koninklijke Metaalunie
10:00-10:50
The digital enterprise in the supply chain

Tatasteel & MCB
12:00-13:30
Lunch
12:00-13:30
Lunch
During the day:
Live demo’s including real measurements

By Mitutoyo, Room 1.03 Choose a time: 10:00 - 11:00 - 13:30 - 14:30 or 15:30. Tickets will be available at the reception of the MBD Solutions Event.
During the day:
Live demo’s including real measurements

By Mitutoyo, Room 1.03 Choose a time: 10:00 - 11:00 - 13:30 - 14:30 or 15:30. Tickets will be available at the reception of the MBD Solutions Event.
16:30 - 17:30
Closure & Drinks
16:30 - 17:30
Closure & Drinks
Room 2
09:00-09:30
Registration visitors
09:30-10:00
Opening

Sikko Wittermans, MD DE Mechanical Development, ASML
Godfried Kaanen, Chairman, Koninklijke Metaalunie
12:00-13:30
Lunch
During the day:
Live demo’s including real measurements

By Mitutoyo, Room 1.03 Choose a time: 10:00 - 11:00 - 13:30 - 14:30 or 15:30. Tickets will be available at the reception of the MBD Solutions Event.
16:30 - 17:30
Closure & Drinks
Room 3
09:00-09:30
Registration visitors
09:30-10:00
Opening

Sikko Wittermans, MD DE Mechanical Development, ASML
Godfried Kaanen, Chairman, Koninklijke Metaalunie
11:00-12:00
Using MBD in downstream manufacturing processes (NX CAM/CMM)

Siemens & CARDS PLM Solutions
12:00-13:30
Lunch
During the day:
Live demo’s including real measurements

By Mitutoyo, Room 1.03 Choose a time: 10:00 - 11:00 - 13:30 - 14:30 or 15:30. Tickets will be available at the reception of the MBD Solutions Event.
16:30 - 17:30
Closure & Drinks
Room 4
09:00-09:30
Registration visitors
09:30-10:00
Opening

Sikko Wittermans, MD DE Mechanical Development, ASML
Godfried Kaanen, Chairman, Koninklijke Metaalunie
12:00-13:30
Lunch
14:30-15:20
The basic statistics of MBD

Sigmetrix
15:30-16:30
3D CAD models with semantic PMI

Capvidia & TFH & Settels Savenije
During the day:
Live demo’s including real measurements

By Mitutoyo, Room 1.03 Choose a time: 10:00 - 11:00 - 13:30 - 14:30 or 15:30. Tickets will be available at the reception of the MBD Solutions Event.
16:30 - 17:30
Closure & Drinks
Solution provider  Solution Where? 
PaddedImage12080FFFFFF AESC

AESC is distributor for the Benelux for ANSYS SpaceClaim with a focus on companies in metal. Our engineering tool SpaceClaim lets you directly change any CAD model no matter the origin. The product is made for metal workshops, FEM experts, 3D printing and additive manufacturing. ANSYS SpaceClaim has PMI functionality for STEP files and JT. AESC also distributes simulation and sheet metal software.

 
ASML SQ

ASML introduced the 3D PMI or MBD way of working. Learn more about the project, the implementation roadmap, the 3D Technical Product Documentation and ASML TPD standards

 
bct logo

Optimizing data quality and downstream quality processes

In order to remain competitive, manufacturing companies must continuously improve their processes. Automation and data quality is key to get reliable processes. 
This presentation will show:

- data validation before release increases the reliability of downstream processes
- tracking of changes across design revisions to automatically create change reports

 
CAD2M

Do you wish your production was rapid and smooth? Are you overwhelmed by drawings in your operation? CAD2M is here with SOLIDWORKS MBD to provide you the tools to share and reuse intelligent 3D data while working hand-in-hand with 2D drawings and printouts. All complying with the industry's highest standards.

 
CAPVIDIA

Capvidia focuses on True MBD: 3D CAD models with semantic PMI (QIF or STEP) that is both human-readable & machine-readable. This empowers various departments from design to manufacturing for downstream applications: automation & quality control processes and upstream insights: Big Data & improved designs. All produced from a “single source of truth” authority model.

Companies have trusted Capvidia software to begin their MBD journey with pilot projects automating first article inspection or reducing time on CMM processes up to 80%. Whether it’s dealing with legacy 2D to 3D data, CAD translation & validation, CMM uncertainty estimation, and other MBD-related processes, Capvidia is the reliable partner you can trust to.

 
DS 2

Discover what SOLIDWORKS Model-Based Definition can do, including: defining and organizing 3D dimensions, tolerances, notes, Bills of Material and other annotations. It lets you customize manufacturing templates such as Part or Assembly Specifications and Incoming Inspection Reports. In addition, you can publish to formats like eDrawings®, STEP 242, and 3D PDF for clear 3D communications.

 
logo DVC SI met slogan

Support businesses to create more added value and become more competitive with data, that is the goal of the Data Value Center – Smart Industry (DVC-SI)
We help entrepreneurs, decision makers and professionals to make optimal use of data: to optimize processes, development of new services and business models and to improve the needed knowledge and competences.

With our independent and accessible approach, we help the Dutch manufacturing industry to respond to the fast moving data economy in order to strengthen their competitive advantage. We bundle our knowledge, skills and make it accessible via our cooperative initiatives.
The DVC-SI is a partner initiative from Brabant Development Agency, Brainport Development, Brainport Industries, FME, JADS, Royal Metalunion, Midpoint Brabant, REWIN, SURF and TNO, and is supported by Province North-Brabant and the Ministry of Economic Affairs and Climate 

 
Encoma Improve your cost awareness during design. Effective product cost estimations can be done with use of 3D PMI.   
logo FME Scan your company and get support to develop a roadmap for implementing The Factory of the Future.   
Glovius

3D Enterprise Visualization Solution
Glovius is a modern CAD Visualization solution available on Windows, iOS, Android and Web Browsers. Glovius offers powerful tools for 3D and 2D data consumption, analysis, workflow automation and report generation. Glovius is used by thousands of OEM’s and their suppliers in Manufacturing, Aerospace, Automotive and Hi-Tech industries.

 
GPOCAD

During our presentation we would like to start from Business Driver to the use of the MBD Solutions in the organization. Also, in our interactive presentation we will share some use cases to show how your company will gain all the benefits from MBD. Using PTC Creo, in combination with PTC Windchill and CapVidia, gives an organization PMI (Product Manufacturing Information) embedded in the 3D model and managed and shared to all stakeholders not only Just-in-Time but also Just-What-They-Need

 
Hexagon MI RGB hires

Hexagon is a global leader in software, sensor and autonomous solutions. We are putting data to work to boost productivity and quality across manufacturing applications. Our technologies are shaping production ecosystems to become increasingly connected and autonomous.

Hexagon will demonstrate the advantages of using PMI-data for the sheet metal and machining industries in the area of NC-programming and quality inspection. Laser technology Janssen, a Hexagon customer, will present the advantage of using PMI-data for sheet metal for the communication between OEM and supplier

 
Inventas

The mechanical drawing has evolved to model-based definition (MBD). In a 3D model, the designer nowadays has to provide all information that is relevant to production (PMI). During the Inventas training Model Based Definition you will learn all about the changed meaning of existing symbols and about new symbols for 3D-notations.

 
Kisters KISTERS offers visualization solutions for the manufacturing industry, simplifying the reuse of CAD data. 3DViewStation supports native CAD file formats as well as all important standards, it is very fast, easy to use, ships with rich functionality, available for Desktops, Browsers, mobile, VR, can easily be integrated with any system.   
mikrocentrum nl

Product Manufacturing Informatie (PMI): In ISO 16792 language this means the annotations and attributes contained in a 3D solid model that compliment the geometric definition and complete the digital data set.

The process and accomplishment of applying PMI to a 3D solid CAD model is Model Based Definition (MBD). 
Mikrocentrum - GD&T programms teach recommended  practises to apply Geometric Dimensioning and Tolerancing for 2D drawings and 3D Models, Model Based Definition

 
Mitutoyo

The Mitutoyo MiCAT Planner boasts amazing performance, speed and usability. MiCAT Planner drastically reduces programming efforts in working out part programs for coordinate measuring machines (CMMs). The software’s automatic measuring program generator saves vast amounts of time and cost by optimally using the PMI on your CAD-model. We will give live demo’s in Mikrocentrum’s demo room 1.03, including real measurements on a Mitutoyo CMM.

 
Neoapps

TE Toolbox – Realizing MBD with Technical Elements

The TE Toolbox allows you to realize MBD in NX by using Technical Elements. TEs are recurring design features such as UDF or reusable objects but much smarter thus carrying much more information such as PMI, attributes, etc. that can be used to drive downstream activities such as CAM and CMM.

 
Polyworks How can we optimize the complete production process? With a blank sheet of paper we looked at the complete production process and how we as PolyWorks could find ways to improve this. Two main items which are crucial. What to communicate and how to share. What to communicate, PMI will define this. How to share, with Dataloop it is possible to share realtime measurement information.  
settels We help companies to implement Model Based Definition in engineering, manufacturing and inspection. Together with you we define a pragmatic implementation plan for MBD based on your company’s needs. As partner of Siemens we know all about MBD in NX. Not only in NX CAD, but also how to reuse PMI in NX CAM Feature Based Machining and in NX CMM for inspection. We offer short on-site training courses for JT2Go and support the MBDvidia plug-in for NX  

Cardsplm logo CMYK tcm31 63830

siemensMBD

Session 1 : Introduction MBD & Leveraging the MBD information in downstream processes:
In this session we will give a brief introduction on PMI and MBD and the current state of where we are. We will keep it very practical and introduce the different MBD Solutions Siemens has to offer for the supply chain. We will give you an overview of the tools like; NX CAD, 3DPDF, JT2GO, Teamcenter Visualization and Active Workspace. After the session we welcome you to further deep dive on the Solution Square!

Session 2 : Using MBD in downstream manufacturing processes (NX CAM/CMM):
How to leverage MBD and PMI for manufacturing? In this session we will deep dive in NX CAM/CMM where we demonstrate the benefits of using PMI for Machining, Quality and Inspection. We will leverage the 3D models and show how to automate the programming with 1 integrated workflow between CAD-CAM-CMM.

 
sigmetrix

This session will present statistics about the current quality of the tolerance data that forms the basis of MBD as well as tools to help ensure that data correctly reflects the needs of your products and the demands of your customers.

 
TFH2x

TFH technical services is an early adaptor (2011) for MBD and MBE in Creo and Windchill. Together with Braun Germany we have created a Technical Committee for PTC Creo MBD. This to share information about the journey into MBD/MBE. Companies that take part in this are Festo, Continental, Braun and many more. With several implementations we can demonstrate the benefits from MBD/MBE using PTC Creo in combination with Windchill and QIF (Capvidia). Learn how to Re-Use your Creo Cad Data downstream and benefit from this.

 
fdpmetaal

Vison on the digital enterprise by TataSteel & MCB. The Smart Connected Supplier Network by TNO. Showcase smart connectivity and its benefits

The sheet metal industry is no different to other industries in recognising the importance of collaborating in smarter and more digital ways. To achieve this, it is imperitive that all parties work with standards. Through this, productivity and quality will increase, in turn decreasing lead times. In three consecutive presentations you will be informed about how we can together transform the sheet metal industry into a much more effective value chain.

 
werth mbd

The WinWerth measurement software generates fully automatic measurement sequences using CAD models with PMI. The process to generate a measuring sequence is made much easier. So the requirements  on the qualification of the operator is reduced significantly, so the company will save an enormous amount of time and money. This new development  can be used for all Werth CMMs with optical and tactile sensors and computed tomography.

 
ZeissSB

The ZEISS PMI solution enhances Model Based Definition data to Product Manufacturing Information INSPECTION by automatically generated measurement plans. Furthermore we accelerate development steps because of virtual data measurement of STL-Datasets and comparison of revised CAD parts in existing inspection plans. ZEISS CALYPSO is a fully integrated measurement software with downstream friendly data formats, with default measurement strategy templates and numbering of dimensions and GD&T.

PiWeb is a scalable IT solution for quality data management. It organizes information flow resulting from the “digital factory” and increases your quality and productivity. 
 

The MBD Solutions Event is an event to showcase several solutions and possibilities with respect to the use and re-use of ASML 3D PMI / MBD Technical Production Documentation (TPD). These companies will show you their solutions on the Solutions Square:

PlattegrondMBD 3

The 2D drawing has been replaced by 3D PMI. Various brainstorming sessions with ASML suppliers have revealed the challenges they face. A requirements list has been drawn up from this.

Requirements for effective 3D PMI application in the product generation process:

  • Design changes or revisions must be clear and workable. (incl 3D model comparison).
  • GD&T use and settings needs standardization for correct and efficient use.
  • The Technical Product Documentation (TPD) model/GD&T quality and ASML standards must be optimal and secured for correct downstream re-use.
  • CAD files should be interchangeable with all other CAD software.
  • All native CAD information should be readable as PMI information. Notes, remarks, etc… need to be PMI identified (tagged).
  • The NX.prt, JT and STEP files in a TPD package must be 100% identical. (B-rep and PMI fidelity).

Design review, calculation & work preparation:

  • The JT viewer must have possibilities for markups in views, creation of customized views and saving & rework these views.
  • A standard overview of all created model-views and the ability to make black & white prints of these views will increase the effectivity of reviews and TPD use in the workshop.
  • Added information in customized views must be usable for downstream applications and therefore needs PMI identification.
  • The STEP file format must be PMI compatible.

Manufacturing:

  • Execution of an effective (First Article) inspection process needs an automated measurement plan and inspection report based on PMI. It must be able to add dimensions to the ASML mdTPD information for full automation.
  • More CAD and/or filter functions in the JT viewer will help work preparation and the ‘drawing in red’ or ‘red line TPD’ process.
  • 3D PMI needs a 3D digital ballooning process for inspection (software).
  • CMM software needs to be able to work with NX.prt, JT file or PMI-STEP file.
  • CAM software must be able to read PMI-STEP or NX.prt directly.
  • CAM software must be 3D PMI compatible according MBD standards.

General:

  • Need for common way of working for MBD in the industry
  • Need for support in development towards the ‘digital factory’.
  • Investments must be realistic in relation to the benefits


Do you mis a requirement in this list? Let us know! events@mikrocentrum.nl

The second edition of the MBD Solutions Event will take place at:

Mikrocentrum
De Run 1115
5503 LB Veldhoven

Mikrocentrum


Do you live nearby? Take your bike.
Mikrocentrum is also good accessible by public transport. 

Near Mikrocentrum is a bus stop: Provincialeweg Oost. 

The following buses depart from Eindhoven Central Station on the north side of the train station.

Line 119 (direction Veldhoven de Run) - departs every 10 minutes during rush hour.
Line 319 (direction Reusel) - departs every 15 minutes
Line 19 (direction Bladel) - departs every 30 minutes
Line 18 (direction Bergeijk Loo) - departs every 30 minutes

Do you prefer to come by car?? Go carpooling. This way you contribute to a sustainable future.

Our location has 170 own parking places. In addition, there are sufficient parking options in the area.

 

CONTACT 

Organisation MBD Solutions Event 2020

Mikrocentrum
Postbus 359
5600 AJ Eindhoven

T: +31 (0)40 – 296 99 22
E: events@mikrocentrum.nl

KarinMous klein leo broers mbd
Visitors information Content information
Karin Mous Leo Broers
E: k.mous@mikrocentrum.nl  E: l.broers@asml.com